Canon MP245 Printer Counter Resetter

When the error or pop-up message appears on your screen �ink absorber is full�. Your printer needs to reset. Here�s how to fix it

Hardware Reset

• Turn off the printer without pulling the power cords
• Hold down STOP/RESET button and press Power button
• Keep holding down Power button and let STOP/RESET button go
• Then Press STOP/RESET button twice then let BOTH buttons go
• The Alternate Blinking error is gone, this means that the printer is in Service Mode state.

Don�t turn off the printer after hardware reset, then proceed to next step �Software Reset�.

Software Reset

• Extract and double click MP245.exe
• Click Reload Button and you will get a new USB port
• Load  papers in your printer and press the "Main" Button once
• Wait until the printing is done
• Press "EEPROM Clear" button to clear EEPROM
• Press EEPROM button and the printer will print a page of  text
• Turn  off the power of  printer(sometimes you have to press twice the power button to turn off)
• turn on again and its done

 download canon resetter

Related Posts by Categories