Canon IP2770 Printer Error code 5B00

Guide on how to reset the Canon Ip2770 Printer

Hardware Reset:

• Turn off the printer and unplug the power cord
• Plug the printer power cord 
• Press the RESUME button for three seconds
• Press the POWER button until the green lights appear
• Hold POWER button, don't release the RESUME button
• Release the Resume button, but do not release the POWER button
• Hold POWER button while pressing the Resume button 5 times

Led will flash alternately orange glow green with the last orange. (Don�t mistakenly press 4x because the printer will be totally dead and you have to turn unplug the power to turn it off)

• Release both buttons simultaneously, Led will blink briefly and then will glow GREEN

The computer will detect new devices,  ignore it

Note: Don�t turn off the printer after this procedure is done. Proceed to Software Reset

Software Reset

run Canon iP2770 Software Resetter  
Extract the File iP2770 Resetter 
Prepare a two paper in the printer 
Run the program iP2770 Resetter 

Click "MAIN", then the printer will proceed and iP2770 will print one page with the words "D = 000.0"

Click the "EEPROM Clear" 

Click the "EEPROM", and the printer will print the results off iP2770 Resetter. One of the writing row as follows: "TPage (TTL = 00 000)"

Turn off the printer by pressing the POWER button.

Download the Software Resetter: Click HERE

Related Posts by Categories