Counter resetting Epson Stylus RX610 Printer

| |
Restore the printer problem and print back to normal after following the troubleshooting guide. The  Message �printer near end service life�  or �printer end of service life�, it does not mean that you should throw the printer. There's no problem in your printer,  the problem was the maximum counter  value  have reach to its limit.To fix the this kind of problem you need to  download the program and before opening the Epson adjustment utility, make sure that the power of the printer is on, properly connected to your PC System and most of all there�s no pending print task in your printer. Click here to download epson  resetter. Tested in Windows XP and Windows 7 32 bit Desktop  Computer and Notebook PC.

The Epson Stylus RX610 Printer Model
Epson Stylus Photo RX690_1

Follow the steps below:
  • Open AdjProg.exe
  • Click Accept
  • Click "OK"
  • Click the Particular Adjustment Mode
  • Select Waste ink pad counter
  • Click OK
  • Click Initialization (this will reset counter)
  • Turn off the printer
  • Then turn on again.
Finish!


Related Posts by Categories

0 komentar:

Posting Komentar