Reset Canon MP287 Error Code E08

when turned on the printer error  will  appear on the lcd panel of mp287  printer, the error code  e08  and if printing the  "the ink absorber is almost full" error message appears. Click here to download the canon resetter software.

Follow the guide to fix the printer error

Service mode:

1. turn off canon mp287 error e08 that by pressing the power button. do not unplug the power cable
2. press and hold the stop/reset followed by pressing the power button. so both buttons depressed position.
3. off the button stop/reset while holding power button.
4. press the stop/reset button as much as 6 times.
5. then release both buttons at the same time, then perform the software mode

Software Mode

1. Connect the USB Cable of the printer to the computer
2. The computer  your computer will detect new hardware
3. Run the service tool.
4. select the main menu in the absorber & platen and then click set next to his right
5. canon mp287 printer error e08 who will be back to normal

Read More..

Counter Reset Canon PIXMA iP3680 Printer

This is the manual guide on how to reset your Canon Pixma Ip3680 printer.
Hardware Reset: Entering Service Mode
You have to enter in service mode in order to used the resetter. To do that follow  the following procudre

• Turn off the printer without pulling the power cords
• Hold down RESUME button and press Power button
• Keep holding down Power button and let RESUME button go
• Then Press RESUME button twice then let BOTH buttons go
• You will notice that the Alternate Blinking error is gone, this means that the printer is in Service Mode state.

Software Reset: Using the Resetter
After you download the resetter, extract it and double click "iP3680.exe"

• Click Reload Button and you will get a new USB port
• Load some papers in your printer and press the "Main" Button once, wait until the printing is done
• Then press "EEPROM Clear" button to clear EEPROM
• Then press EEPROM button and the printer will print some text
• Then power off the printer(sometimes you have to press twice the power button to turn off) and turn on again.

 Download Canon Resetter

Read More..

Service Canon MX328 Printer

Canon Pixma MX328 is one of the Inkjet multifuction (Print, Scan, Copy, Fax) printer from Canon. Like general case of printer, after filled by ink usually ink level not full. At some cases of printer, after ink level empty, printer cannot be used to print.

Here the Solution to reset the ink level for Canon Pixma MX328 follow this steps to reset the ink level in your canon MX328.

Option 1

• Disconnect the power cable
• Connect it while holding down the power button
• With the power button still down
• press twice the "Cancel" red button
• Release the power button
• The printer turns into a  factory mode...(wait for about 10 seconds, until the message "Idle" appears)
• Press the ">" (next to the "OK" button) once."Shipping Mode 3"
• Press the "OK" button
• Press "OK" again for "Without cleaning"
• A test page will print
• Open the cover
• Disconnect the power cable again
• Take out both cartridges
• Close the cover
• Connect the power cable once again
• Turn the printer on
• Now just put the cartridges back

Opton 2

• Switch off the Canon MX328 and disconnect the power cable
• While press and hold the power button, Connect the power cable to electric socket
• While pressing the power button, press the �Cancel� button (red button)
• Now release the power button and the printer turns into a kind of factory mode. Wait for 10 seconds until it says �idle�
• Press �>� (next button) once �Shipping Mode 3?
• Press the �OK� button. Press �OK� again for �without cleaning�
• A test page will print
• Open the cover, like you are about to change the cartridges
• Disconnect the power cable again without switch off the printer
• Take out the both cartridges
• Close the cover
• Connect the power cable and turn on the printer
• put the cartridges back and the ink level in the canon Pixma MX300 have full again.

To finish resetting.. Download the software reset program
Software

Click here to Download Canon Service Tools

Read More..

Canon iP1000 Reset Tool

This is the manual guide on how to reset the Canon iP1000 printer. Just follow the guide below

Hardware Reset

• Turn off the printer and disconnect the printer cable.
• Press and hold the POWER button then turn on the printer.
• The LED indicator must  be green.
• Press and release the RESUME button , the indicator (L.E.D.) should be orange.
• Press and release the RESUME button again, the indicator (L.E.D.) should be green.
• Release both buttons.

After doing hardware reset don't turn off the printer just proceed two hardware reset

Software Reset

• Reconnect the printer cable
• Open General Tools Software
• Select USB Port and then select "EEPROM CLEAR"
• Push the "MAIN" bottom and "PLATEN" bottom in to "CLEAR WASTE INK COUNTER" box
• The led printer will be blinking for few moment and it should be reset
• Finally, push the "RELEASE" bottom and then push the "QUIT" bottom to exit program

  

Click Here to Download Canon Resetter

Read More..